メインコンテンツにスキップ

Steam Deck 左側ボタンボードの交換

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての8個のガイドに反映されます。

手順 6を翻訳中

英語
日本語
手順6
Steam Deck Left Button Board Replacement, Disconnect the left haptics: 手順 0、 3の画像 1 Steam Deck Left Button Board Replacement, Disconnect the left haptics: 手順 0、 3の画像 2 Steam Deck Left Button Board Replacement, Disconnect the left haptics: 手順 0、 3の画像 3
Disconnect the left haptics
  • Exercise caution when lifting this connector—pry up on the connector itself, not its housing.

  • Use the pointed end of a spudger to lift up on the haptics cable to disconnect it.

  • Alternatively, you can leave the haptics connected to the button board and flip the board up and over the edge of the shell and out of the way.

このコネクタを持ち上げるときは、基板に固定されているハウジングではなく、コネクタ自体をこじ開けるように注意してください。

スパッジャーの尖っている方の先端でハプティックケーブルを持ちあげて、接続を外します。

コネクタを外す代わりに、ハプティックをボタン基板に接続したまま基板を筐体の外に向かってひっくり返して作業の邪魔にならないようにすることもできます。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります

OSZAR »